To monitor site progress remotely, combine two things: proof captured on site at the time, and a physical check now and then. No single method stops everything. Use live-capture photo reports for daily proof across many sites. Use site visits or audits for quality and measurement. Use CCTV or drones for large, open or hard-to-reach areas. This post is for contractors, EPC owners and PMCs (project management consultants) who manage subcontractors from a distance. It compares five methods, shows what each misses, and gives a one-week setup.
Which method should you use when you can't be on site?
Start with what you need to know, then pick the method that answers it.
- You need daily proof of what was done, at many sites: live-capture photo reports.
- You need to judge quality, measure work or check concealed work: a site visit or a third-party audit.
- You need to see a large open area or a site nobody can reach easily: a drone survey, or CCTV for a fixed spot.
- You need a quick answer today: a call or a chat message, treated as a lead and not as proof.
Most teams end up using two or three of these together. The rest of this post shows what each one covers and where it stops.
How remote monitoring goes wrong
Most failures are not dishonesty. They are gaps between what happened and what reached you.
- Old or reused photos: a picture from last week, or from another site, is sent as today's work. Nothing in a forwarded image says otherwise. Our post on stopping employees uploading old photos goes deeper.
- Missing time and place: chat apps often strip location from photos, and a phone clock can be changed. You see a picture, not when or where it was taken.
- Wrong framing: a close-up of one finished bay hides the three that are not done.
- Reports built late: a report assembled days later from memory and a gallery is hard to trust, and hard to check.
- Too much, too scattered: photos in five chat groups, notes in a diary and calls with no record. Nobody can rebuild what happened on a given day.
A good method fixes at least one of these. None fixes all of them.
Chat photos and calls
This is what almost every team already does, and it is a fine start.
Method: photos, videos and voice notes over a chat group, plus phone calls.
What it stops: silence. You hear from the site the same day, and you can ask a question and get an answer in minutes.
What it misses: proof. Chat apps compress images and often drop location data. The time shown is the time of sending, which can differ from the time of the work. A gallery photo is easy to reuse. Photos pile up in groups with no numbering, so finding last Tuesday's pour takes scrolling.
What you need: nothing new, but a rule on what to send. For example, a fixed list of views per day, taken that day.
Use it for quick coordination. Do not rely on it alone for a running bill (RA bill) or a client dispute.
Site visits and third-party audits
Method: you, your engineer or an independent auditor goes to site and checks the work in person.
What it stops: most kinds of misreporting that matter. A person on site can measure, touch, test and look behind things. This is the best way to judge quality, finishing and safety.
What it misses: the days nobody is there. A visit is a snapshot. A subcontractor who knows the visit date can prepare for it. Visits also cost travel time, and with many sites you cannot be everywhere.
What you need: a schedule, a checklist, and a written record. Photograph what you inspect, so the visit itself leaves proof.
Visits fit better than any app when the question is quality, not presence. Concealed work, such as earthing pits or reinforcement, is best checked in person before it is covered. See proof of concealed work photos.
CCTV and drone surveys
Method: fixed cameras watch a gate, store or work front. A drone flies a pattern over a large site and returns images or video.
What they stop: guesswork about large areas. A drone shows layout, stockpiles and the extent of an earthwork or a solar field in a way ground photos cannot. CCTV shows who came in and when, even when nobody is sending photos.
What they miss: detail and context. Neither shows the inside of a joint, the grade of a weld or a concealed layer. CCTV watches one view, and a crew can work just outside it. Drone flights depend on weather, permissions and a trained operator. Drone flying is regulated in India, so check the current requirements before you fly.
What you need: a power and network source for CCTV, a person to review the footage, and a trained, competent operator for drones.
Choose these when the site is big, open or remote, or when security is the concern. They are the better tool for those jobs.
Live-capture photo reports
Method: the crew photographs and films the work with a camera app that captures live, with no gallery upload, and stamps each image with GPS and time. A report is made from the set.
What it stops: reused photos and missing time or place. Because the image is captured inside the app, an old gallery picture cannot be submitted as today's.
What it misses: quality and judgement. A photo shows what the camera was pointed at. It cannot show what is behind the wall, nor whether concrete was cured properly. GPS can also drift indoors, so a stamp is a strong clue and not a surveyor's measurement. And a person can still stage a scene in front of the lens.
What you need: a phone for each field person, a short list of required photos, and someone to review what comes in.
This is the method that gives you a daily, comparable record across sites without travelling. Pair it with visits for quality.
How to do it with Verafii
Verafii is a live-capture camera and report app. Here is how a subcontractor's supervisor and you would use it for one site.
- The manager sets up the site and the field person in the web dashboard, and the supervisor signs in on the Verafii app (iOS or Android).
- On site, the supervisor opens the app and starts a job session for that site.
- They tap the camera and take the agreed views. Every photo or video comes from the in-app camera, and GPS and time are burned into the image at the shutter.
- They add a short note to each view, for example the bay, the floor or the stage.
- If there is no signal, they keep capturing. The app works offline and uploads when the phone is back online.
- For a closer look, the supervisor can record live video with audio, for example while you ask them to show a corner of the site.
- Before leaving, they tap to make the PDF report. It carries the location, device, time and a QR code.
- You open the web dashboard, see each session with numbered photos, video and notes tied to the site, and export what you need.
Anyone can check the report by scanning its QR code, with no account or app, as explained in how to check a Verafii report.
What stays optional
Attendance and geofenced sites are add-ons, available on request and charged on top of the plan. With them, crews clock in from site with a selfie. Live tracking is another add-on on request. It only shows a person's location between clock-in and clock-out, and the customer's admin can exempt a person. Fake GPS is flagged on the photo and report on Android and iPhone, not hidden.
Verafii does not replace a site visit, CCTV or a drone, and it does not measure quality. For the report itself, see our construction site photo report page.

Set it up in a week
You can have a working routine in five or six working days.
- Day 1, decide what you need to see. Write five to eight views per site per day: for example the work front, the stage just finished, materials on site and the crew. Keep it short enough that people will do it.
- Day 2, name your sites and people. List sites and who captures at each. Decide who reviews and how often.
- Day 3, start the free trial. It runs for 30 days. Install the app on two or three phones and set up one site.
- Day 4, run a test on one site. Have the supervisor capture the list, make a report and send it. Check it on the dashboard and scan the QR yourself.
- Day 5, fix the list. Remove views nobody needs. Add one you missed. Tell the crew in their own language; the app has 11 languages, though reports and watermarks stay in English.
- Day 6, add visits and the rest. Put a visit on the calendar for quality checks. If you want attendance or live tracking, ask for a quote, since these are add-ons on request.
The price depends on your team, such as how many field agents and admin users you have, and how long you keep evidence.
Be fair to your crew: what this can't catch
Remote monitoring works better when the crew understands it. These points keep it fair.
- Tell them first. Explain what is captured, when, and who sees it. For attendance or live tracking, get consent. Our post on field staff tracking apps, limits and consent covers this in more detail.
- Track only work hours. Live tracking, where switched on, runs only between clock-in and clock-out.
- Expect GPS drift. Inside a building, a basement or between tall structures, the location can be off by some distance. A photo that appears to be in the wrong place may simply be a weak signal.
- Ask before you accuse. A mismatch is a reason to call and ask. Weather, a dead battery or a lost signal explains many gaps. A flagged fake GPS is a reason to look closer, not proof of intent.
- Remember what a photo can't show. It cannot show quality behind a surface, the strength of a joint or whether the right material went in. A report shows where and when a photo was taken, not that the work is good.
- Whether a client or department accepts a record is their decision. Verafii gives you a stamped, checkable record; it does not decide that for them.
The aim is a shared record the subcontractor can use too, for example to support their own bill.
Frequently asked questions
How can I monitor a subcontractor's work without visiting the site every day?
Ask for a fixed set of photos each day, taken live with time and location stamped, and review them from your desk. Add a scheduled site visit for quality and measurements. No remote method replaces a person checking the work in person.
Are WhatsApp photos enough to monitor site progress remotely?
They are good for quick coordination, but weak as proof. Chat apps often drop location data, the sent time may not match the work time, and gallery photos can be reused. For bills or disputes, keep a stamped record as well.
Is CCTV or a drone better than photo reports?
It depends on the site. Drones suit large open areas, and CCTV suits fixed spots and security. Photo reports suit close views of work stages across many sites. Many teams use more than one.
Can I track my site staff live with Verafii?
Live tracking is an add-on available on request, charged on top of the plan. Once switched on, managers see a person's location only between clock-in and clock-out, and the admin can exempt a person. Nothing is tracked outside work hours.
What if a photo's GPS location looks wrong?
Ask before you accuse. GPS can drift indoors and near tall buildings, and a weak signal can shift the point. Call the person, check other photos from the same session, and look at whether a fake location was flagged.
Does Verafii work without internet on site?
Yes. Verafii captures with no signal and uploads when the phone is back online. The GPS and time are stamped at capture, so the record keeps the time of the work.
Will Verafii make sure my client accepts the photos?
No. Whether a client, PMC or department accepts a record is their decision. Verafii gives them photos stamped with GPS and time, taken live, and a report anyone can check with a QR scan.
Try it on one site for 30 days
Start the 30-day free trial on one site and see what a daily live-capture report looks like. If you want attendance, live tracking or other add-ons, ask for a quote. The price depends on your team: field agents, admin users, how long evidence is kept, and photo and video quality.

