Mission Amrit Sarovar expects every pond to be geo-tagged at three phases: before work starts, during construction and after completion. The mission's PIB note says this is done through the official government app, and the progress is tracked on the Amrit Sarovar portal. This post is for gram panchayat staff, junior engineers and contractors on pond works. It explains the three phases, what a good pond photo shows, and how to keep your own backup record. Verafii does not upload to the portal.
What the mission asks for in photos
The mission's guidelines and PIB note describe geo-tagging at three different phases. Every Amrit Sarovar that is constructed or rejuvenated is geo-tagged before the construction, during the construction and after completion of the asset. The PIB note on Mission Amrit Sarovar and the mission guidelines carry this wording.
The same documents say the panchayat-level officer uploads at least three videos of the site: before commencement, during development and on completion. Other media that shows the pond's development can be added.
One point needs care. Official summaries name the GeoMGNREGA app of Mahatma Gandhi NREGS for the three-phase geo-tagging, while others speak of the Amrit Sarovar mobile app. We could not open every official PDF in full, so ask your block or district office which app your pond must use. Whatever they say, that app is the one that counts.
Who issued it and how the portal and app fit in
Mission Amrit Sarovar was announced by the Prime Minister on 24 April 2022, on National Panchayati Raj Day. The target was at least 75 ponds in every district. Seven ministries take part, and the Ministry of Rural Development is the nodal ministry that issued the guidelines, as reported by PIB.
The technical partner is BISAG-N, the Bhaskaracharya National Institute for Space Applications and Geo-informatics. It built the Amrit Sarovar portal, which lists potential sites, tracks progress and holds uploaded media. A user manual and user-group notes are published on the NCOG site.
The mission's headline target of 50,000 ponds was reported as met in 2023. We did not find a notice that closes the mission, but we could not confirm its status for November 2026 either. Check with your district before you plan new geo-tagging.
Before, during and after: the three geo-tagged phases
Each phase answers a different question for the reviewer.
- Before: what was the site like, and where exactly is it? This is the baseline. Without it, nobody can show what the work changed.
- During: is work really under way? Show excavation, bund formation, silt removal or inlet and outlet work as they stand that week.
- After: is the pond finished and holding the shape described in the estimate? Show the full water body, the bund, the inlet and outlet, and any signboard or boundary.
The sequence matters more than the number of photos. A "before" taken after excavation, or an "after" taken at the start, is the first thing a reviewer questions. Take the first set before the machine arrives.
If the work runs for weeks, take more than one "during" set. The official app decides how many it accepts. A second, separate record of your own can hold the rest.
What a good pond photo shows
A reviewer sees only the picture and the location tag. So the picture itself must say which pond it is and what state it is in.
- Whole pond: a wide shot from the bund or the road, showing the edges of the water body.
- Fixed viewpoint: the same standing spot and direction in all three phases, so the images can be compared.
- Scale: a person, a marker pole or a vehicle in the frame.
- Work in progress: machines, excavated depth, the bund being raised, with no one posing in front of the work.
- Inlet and outlet: where water enters and leaves, since these show whether the pond can fill.
- Landmark: a temple, a tree line, a road or a village board that stays in all three photos.
- Signboard: the pond's name board, once fixed, if the guidelines call for one.
Keep the lens clean and avoid shooting straight into the sun. A dark or tilted picture of a dry pit proves little.
Why an ordinary phone photo gets questioned
Pond sites are often far from towns, which creates three problems.
- Chat apps drop location: a photo forwarded on WhatsApp usually loses the details a reviewer would check. See how to check the location of a photo.
- The phone clock can be changed: a photo's date is only as honest as the phone's settings. Read can a photo's date and time be changed.
- GPS drifts: in open fields the fix is usually good, but under heavy cloud, near tree cover or beside a tall structure it can shift by several metres. A small gap between two phases is not proof of anything wrong.
- No signal: many ponds have weak coverage, so a capture can fail or be delayed until the crew reaches a road.
The mission's rules are also not fully clear on how many photos each phase takes. Where a rule is unclear, ask the district officer in writing.
How to do it with Verafii
Verafii is a separate live-capture camera. It does not upload to the Amrit Sarovar portal and it does not replace the official app. Photos for the mission must still go through the official app. Use Verafii for your own dated record of the same visits, which helps when a query comes later.
- Open Verafii and create a session for the pond, named with the pond's name and village.
- Tap the camera and take the before photos from your fixed viewpoint. There is no gallery option, so every image is captured live.
- Check that the GPS and time stamp is burned into the picture.
- Add a short note for each shot, such as "Before work, north bund".
- In a weak-signal area, keep capturing. Verafii works offline and uploads when the phone is back online.
- Repeat at the during and after visits, in the same session, so the job record is numbered and tied to the site.
- Before leaving, tap to generate the one-tap PDF report with its QR code.
Anyone can then check a Verafii report by scanning the QR on the public verification page. If a fake location was used, the photo is flagged on the report. Read more on the GPS camera photo report.

Keeping photos organised across several ponds
A gram panchayat or a contractor may handle many ponds at once. Mixing them up is the commonest error.
- One session per pond: never put two ponds in one folder, even if they are in the same village.
- Same name everywhere: use the exact pond name that appears on the portal.
- Three visits, three labels: write "before", "during" or "after" in the note on each photo.
- One person per pond: a named person is easier to ask than a team.
- Weekly review: the junior engineer or supervisor checks that each pond has all three phases.
For other geo-tagging schemes with the same habit, see our guides to PMAY-G stage-wise photos and NMMS geo-tagged photos.
What this record can't do
A photo record has limits, and you should know them before relying on it.
- It is not the official upload: a Verafii report is not on the portal, and no one has to look at it. Whether any department, auditor or client accepts it is their decision.
- It cannot show quality: a photo shows a pond's shape, not the compaction of the bund or the capacity in cubic metres.
- It cannot prove the pond is the right one: location is shown by GPS, which can drift. A reviewer may still ask for a landmark.
- It cannot fix a missed phase: a "before" photo cannot be taken after the work has started.
- Fake GPS is flagged, not prevented: the flag helps a reviewer, who then asks the person.
Be fair to your crew. A mismatch is a reason to ask, not to accuse.
Checklist before you upload
- Confirm with your block or district office which app and which phases apply to this pond.
- Take the "before" photos and the site video before any machine starts.
- Pick a fixed viewpoint and mark it, so you can return to it.
- Include one wide shot, one close shot and a landmark in every set.
- Photograph the inlet and outlet separately.
- Check that GPS is on and the phone clock is automatic.
- Take the "during" and "after" sets in the same spots.
- Name the pond the same way in every record.
- Upload in the official app once there is signal.
- Keep your own live-capture record as a backup, and say plainly that it is not the official upload.
Frequently asked questions
What are the three phases of Amrit Sarovar geo-tagging?
They are before the construction, during the construction and after completion of the pond. The mission's PIB note says every Amrit Sarovar is geo-tagged at these three phases. Ask your district office which app and how many photos each phase needs.
Which app is used for Amrit Sarovar geo-tagging?
Official summaries name the GeoMGNREGA app for the three-phase geo-tagging, and the Amrit Sarovar portal and mobile app for progress and media. Because wording differs, confirm with your block or district office. Photos must go through the official app, not through a third-party camera.
Does the mission ask for videos as well as photos?
Yes. The mission documents say the panchayat-level officer uploads at least three videos of the site: before commencement, during development and on completion. Other media showing the pond's development can also be added on the Amrit Sarovar portal.
Can Verafii upload photos to the Amrit Sarovar portal?
No. Verafii never uploads to a government portal and does not replace an official app. It gives you a separate live-capture record with GPS and time burned in, and a PDF report with a QR that anyone can check.
Is Mission Amrit Sarovar still running in 2026?
The mission was announced on 24 April 2022, and its target of 50,000 ponds was reported as met in 2023. We did not find a notice that closes it, but could not confirm its status for 2026. Ask your district office before planning new work.
What if there is no mobile signal at the pond?
Capture the photos on site and upload when you reach coverage, if the official app allows it. Verafii also captures offline and uploads once the phone is online again. Do not take the photos later from memory or from the gallery.
Will a Verafii report make sure my pond photos are accepted?
No. Whether a department, auditor or client accepts a photo is their decision. The report shows the location, time and device, flags a fake location and can be checked by QR. It supports your record but does not replace the official upload.
Keep your own record of every pond
If your team handles several ponds, start the 30-day free trial and try one pond from before to after. Or ask for a quote; the price depends on your team: field agents, admin users, how long evidence is kept and photo quality. Verafii does not upload to the official portal. This article is general information, not legal advice.

